Conversion kit, bearings & single components

Spare AL7075 X-Lefty 2.0 axle bolt, provided with nylon spacer. Compatible with X-Hub SP or SL X-Lefty 2.0 hubs. It is not compatible for X-Hub SP or SL X-Lefty (please check the relative XHMSLLFTBTMN bolt). New matte finish 2023! Made in Italy. Learn More

Spare AL7075 X-Lefty cap (left hand threded). Compatible with X-Hub SP or SL X-Lefty hubs. It is not compatible for X-Hub SP or SL X-Lefty 2.0 (please check the relative XHMSPLFTCPMN cap). New matte finish 2023! Made in Italy. Learn More

Spare AL7075 X-Lefty axle bolt, provided with nylon spacer. Compatible with X-Hub SP or SL X-Lefty hubs. It is not compatible for X-Hub SP or SL X-Lefty 2.0 (please check the relative XHMSPLFTBTMN bolt). New matte finish 2023! Made in Italy. Learn More

Conversion Kit consists of a Al7075-T6 MTB freewheel for SRAM XD Driver 11-12 speed. Supplied pre-assembled for a quick replacement complete with two bearings, a lip seal, four pawls. Compatible with X-Hub SP and SL Disc or Road SP hubs with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub SP and SL Disc or ROAD SP a SL hubs with 28 point of engagements (sold until September 2017) or with X-Hub MTB SL made before 2012 (with 15 mm internal axle).

Pay attention in case of conversion from hub with free wheel N3W or Microspline (to which the specific axle ends) it is necessary to buy separately the X-12 axle compatible with it (CODE: XHMSLRCLX12MN). New matte finish 2023! Made in Italy.

Learn More

Conversion Kit consists of a AL7075-T6 freewheel for SRAM XDR 12 speed (eTap AXS compatible). Supplied pre-assembled for a quick replacement complete with two bearings, a lip seal, four pawls.

Compatible with X-Hub SP and SL Disc or Road SP hubs with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub SP and SL Disc or ROAD SP a SL hubs with 28 point of engagements (sold until September 2017) or with X-Hub MTB SL made before 2012 (with 15 mm internal axle).

Pay attention in case of conversion from hub with free wheel N3W or Microspline (to which the specific axle ends) it is necessary to buy separately the X-12 axle compatible with it (CODE: XHMSLRCLX12MN). New matte finish 2023! Made in Italy.

Learn More

Conversion Kit consists of a Al7075-T6 MTB freewheel for Shimano HG MTB/ROAD 10-11-12 speed. Not compatible with SRAM XD 11-12 speed. Supplied pre-assembled for a quick replacement. It is complete with two bearings, a lip seal, four pawls, four springs, and a 1.8 mm spacer for mounting a 10-speed cassette. Compatible with X-Hub SP and SL Disc or Road SP hubs with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub SP and SL Disc or ROAD SP a SL hubs with 28 point of engagements (sold until September 2017) or with X-Hub MTB SL made before 2012 (with 15 mm internal axle).

Pay attention in case of conversion from hub with free wheel N3W or Microspline (to which the specific axle ends) it is necessary to buy separately the X-12 axle compatible with it (CODE: XHMSLRCLX12MN). New 2023 matte finish! Made in Italy.

Learn More

Conversion kit consists of a freewheel body in AL7075-T6 Micro Spline 12 speed compatible with two bearings, a lip seal, four pawls and four springs as well as the internal axle and axle end (the bearing preload can be recovered from the existing hub). Compatible with X-Hub SP Boost and X-Hub SL Boost hubs with freewheel with 56 point of engagement sold since September 2017. It is not compatible with the X-Hub SP Boost and X-Hub SL Boost hubs with freewheel with 28 points of engagement (sold until September 2017). Attention: the complete internal axle is essential for the conversions of all hubs sold before March 2020. New matte finish 2023! Made in Italy. Learn More

Conversion kit consists of a freewheel body in AL7075-T6 Micro Spline 12 speed compatible with two bearings, a lip seal, four pawls and four springs as well as the internal axle and axle end (the bearing preload can be recovered from the existing hub). Compatible with X-Hub SP Disc X-12 (12 x 142) and X-Hub SL Disc X-12 (12 x 142) hubs with freewheel with 56 point of engagement sold since September 2017. It is not compatible with the X-Hub SP Disc X-12 and X-Hub SL Disc X-12 hubs with freewheel with 28 points of engagement (sold until September 2017). Attention: the complete internal axle is essential for the conversions of all hubs sold before March 2020. New matte finish 2023! Made in Italy. Learn More

Conversion Kit consists of a Al7075-T6 12s Shimano Micro Spline, two bearings, a lip seal, a four pawls and four springs. Compatible with X-Hub SP/SL Disc X-12 (12x142mm) and SP/SL Boost (12x148mm) with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub SP Disc X-12 with 28 point of engagements freewheel (sold until September 2017). ATTENTION: Compatible for hubs that have X-12 axle and rear Boost 148 sold after March 2020 recognizable by the presence of a laser marking on the axle end. For axles sold before March 2020 please check the respective conversion kit complete with axle (ref. XHCKFWMS56TA142CLMN or XHCKFWMS56TA148CLMN). Supplied pre-assembled for a quick replacement. New matte finish 2023! Made in Italy. Learn More