Conversion kit, bearings & single components
Kits to transform X-Hub SP Disc Front in X-Hub SL Disc QR15 or X-Hub SL X-RS-1 and X-Hub SL Disc Rear in X-Hub SL Disc X-12 and the freewheel from Shimano to XD, XDR, Shimano Micro Spline or Campagnolo and vice versa are available. Practical kits for replacing components subject to wear and upgrading of new solutions where possible are also available.
-
X-Hub X-Lefty Bearing Kit
The kit is composed by n°1 25x37x7 (6805) and n°1 15x28x7 (6902) hi-performance sealed bearings Learn More -
X-Hub Rear Bearing Kit
The kit is composed by n°3 61803 (17x26x5 mm) and n°1 61903 (17x30x7 mm) hi-performance sealed bearings Learn More -
X-Hub Front Bearing Kit
The kit is composed by n°2 61803 (17x26x5 mm) hi-performance sealed bearings Learn More -
X-Hub Spacer PA66 22x17x0,4mm
Nylon PA66 0,4mm spacer to insert between the inner freewheel bearing and the body hub bearing. A hub spacer completely replace the existing steel spacer(s). Compatible with X-hub hubs SP Disc, SP Center Lock, SP Boost, SL Disc, SL Boost e ROAD SP with 17mm diameter axle. Made in Italy. Learn More -
Conversion kit freewheel X-Campy 11-12s 28T
Conversion Kit consists of a AL7075-T6 MTB freewheel for Campagnolo 11-12 speed. Supplied pre-assembled for a quick replacement complete with two bearings, a lip seal, four pawls. Compatible with X-Hub SP and SL Disc or ROAD SP a SL hubs with 28 point of engagements (sold until September 2017). It is not compatible with X-Hub SP and SL Disc or Road SP hubs with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub MTB SL made before 2012 (with 15 mm internal axle). Made in Italy. Learn More -
Conversion kit freewheel Shimano MTB/ROAD 10-11-12s 28T
Conversion Kit consists of a Al7075-T6 MTB freewheel for Shimano HG MTB/ROAD 10-11-12 speed. Not compatible with SRAM XD 11-12 speed. Supplied pre-assembled for a quick replacement complete with two bearings, a lip seal, four pawls, four springs and a 1.8 mm spacer for mount 10 speed cassette. Compatible with X-Hub SP and SL Disc or ROAD SP a SL hubs with 28 point of engagements (sold until September 2017). It is not compatible with X-Hub SP and SL Disc or Road SP hubs with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub MTB SL made before 2012 (with 15 mm internal axle). Made in Italy. Learn More -
Conversion kit freewheel XDR Driver 12s 28T
Conversion Kit consists of a AL7075-T6 MTB freewheel for SRAM XDR Driver 12 speed (SRAM eTap AXS compatible). Supplied pre-assembled for a quick replacement complete with two bearings, a lip seal, four pawls.
Compatible with X-Hub SP and SL Disc or ROAD SP a SL hubs with 28 point of engagements (sold until September 2017).
It is not compatible with X-Hub SP and SL Disc or Road SP hubs with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub MTB SL made before 2012 (with 15 mm internal axle). Made in Italy.
Learn More -
Conversion kit freewheel XD Driver 11-12s 28T
Conversion Kit consists of a AL7075-T6 MTB freewheel for SRAM XD Driver 11-12 speed. Supplied pre-assembled for a quick replacement complete with two bearings, a lip seal, four pawls. Compatible with X-Hub SP and SL Disc or ROAD SP a SL hubs with 28 point of engagements (sold until September 2017). It is not compatible with X-Hub SP and SL Disc or Road SP hubs with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub MTB SL made before 2012 (with 15 mm internal axle). Made in Italy. Learn More -
Conversion kit fw Campagnolo N3W 13s (Ekar) + axle end
Conversion Kit consists of a Al7075-T6 13s Campagnolo N3W (compatible with campagnolo ekar 13speed) , two bearings, a lip seal, a four pawls and four springs. Compatible with X-Hub SP Disc X-12 (12x142mm) with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub SL Disc! ATTENTION: Compatible for hubs that have X-12 axle sold after March 2020 recognizable by the presence of a laser marking on the axle end. For axles sold before March 2020 please check the respective conversion kit complete with axle (ref. XHCKFWMS56TA142CLMN).
Supplied pre-assembled for a quick replacement. Made in Italy. Learn More -
Conversion kit fw Campagnolo N3W 13s (Ekar) + 142 axle + axle end
Conversion kit consists of a freewheel body in AL7075-T6 N3W compatible (Campagnolo Ekar 13 speed) with two bearings, a lip seal, four pawls and four springs as well as the internal axle and axle end (the bearing preload can be recovered from the existing hub). Compatible with X-Hub SP Disc X-12 (12 x 142) hubs with freewheel with 56 point of engagement sold since September 2017. It is not compatible with the X-Hub SL Disc hubs! It is not compatible with the X-Hub SP Disc X-12 hubs with freewheel with 28 points of engagement (sold until September 2017). Attention: the complete internal axle is essential for the conversions of all hubs sold before March 2020. New matte finish 2023! Made in Italy. Learn More