Search results for '(一比一定制)Leeds畢業證學位證利茲大學文憑成績單QQ微信168899991做Leeds留信網中留服學歷認證改Leeds成績單GPA做Leeds假畢業證學位證學位證高仿畢業證PDF電子版申請利茲大學University of Leeds Degree '

Conversion Kit consists of a AL7075-T6 MTB freewheel for Campagnolo 11-12 speed. Supplied pre-assembled for a quick replacement complete with two bearings, a lip seal, four pawls. Compatible with X-Hub SP and SL Disc or Road SP hubs with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub SP and SL Disc or ROAD SP a SL hubs with 28 point of engagements (sold until September 2017) or with X-Hub MTB SL made before 2012 (with 15 mm internal axle).

Pay attention in case of conversion from hub with free wheel N3W or Microspline (to which the specific axle ends) it is necessary to buy separately the X-12 axle compatible with it (CODE: XHMSLRCLX12MN). New matte finish 2023! Made in Italy. Learn More

Conversion Kit consists of a Al7075-T6 12s Shimano Micro Spline, two bearings, a lip seal, a four pawls and four springs. Compatible with X-Hub SP/SL Disc X-12 (12x142mm) and SP/SL Boost (12x148mm) with 56 point of engagements (sold after September 2017). It is not compatible with X-Hub SP Disc X-12 with 28 point of engagements freewheel (sold until September 2017). ATTENTION: Compatible for hubs that have X-12 axle and rear Boost 148 sold after March 2020 recognizable by the presence of a laser marking on the axle end. For axles sold before March 2020 please check the respective conversion kit complete with axle (ref. XHCKFWMS56TA142CLMN or XHCKFWMS56TA148CLMN). Supplied pre-assembled for a quick replacement. New matte finish 2023! Made in Italy. Learn More

Conversion kit consists of a freewheel body in AL7075-T6 Micro Spline 12 speed compatible with two bearings, a lip seal, four pawls and four springs as well as the internal axle and axle end (the bearing preload can be recovered from the existing hub). Compatible with X-Hub SP Disc X-12 (12 x 142) and X-Hub SL Disc X-12 (12 x 142) hubs with freewheel with 56 point of engagement sold since September 2017. It is not compatible with the X-Hub SP Disc X-12 and X-Hub SL Disc X-12 hubs with freewheel with 28 points of engagement (sold until September 2017). Attention: the complete internal axle is essential for the conversions of all hubs sold before March 2020. New matte finish 2023! Made in Italy. Learn More

Conversion kit consists of a freewheel body in AL7075-T6 Micro Spline 12 speed compatible with two bearings, a lip seal, four pawls and four springs as well as the internal axle and axle end (the bearing preload can be recovered from the existing hub). Compatible with X-Hub SP Boost and X-Hub SL Boost hubs with freewheel with 56 point of engagement sold since September 2017. It is not compatible with the X-Hub SP Boost and X-Hub SL Boost hubs with freewheel with 28 points of engagement (sold until September 2017). Attention: the complete internal axle is essential for the conversions of all hubs sold before March 2020. New matte finish 2023! Made in Italy. Learn More

Spare axle end of a rear quick release axle. Compatible with rear X-Hub SP/SL quick release hubs. It is not compatible with rear X-Hub SP Center Lock or Boost hubs (please check the respective specific axle ends). New matte finish 2023! Made in Italy. Learn More

Spare axle end of a rear X-Hub X-12 (12x142) or Boost (12x148) X-Hub SP or SL hubs. Compatible with all Carbon-Ti X-Hub SP or SL Boost (12x148) or X-12 (12x142) rear hubs on the market. NOT compatible with Shimano Microspline and N3W freewheels (please check the respective specific axle ends XHRCLMSMN and XHRCLN3WMN will be purchased separately). New matte finish 2023! Learn More

Spare axle end of a rear X-Hub X-12 (12x142) or Boost (12x148) X-Hub SP or SL Micro Spline hubs. Compatible with all Carbon-Ti X-Hub SP or SL Boost (12x148) or X-12 (12x142) Micro Spline hubs on the market. NOT compatible with Shimano 10-11s (HG), SRAM XD/XDR 11-12s, Campagnolo 11-12s (please check the specific XHMSLRCLX12MN axle end) or Campagnolo N3W 13s (please check the respective specific XHRCLN3WMN axle end). New matte finish 2023! Learn More

Spare axle end of a rear X-Hub X-12 (12x142) or Boost (12x148) X-Hub SP or SL N3W. Compatible with all Carbon-Ti X-Hub SP or SL Boost (12x148) or X-12 (12x142) N3W hubs on the market. NOT compatible with Shimano 10-11s (HG), SRAM XD/XDR 11-12s, Campagnolo 11-12s (please check the specific XHMSLRCLX12MN X-12 axle end) or Shimano Micro Spline (please check the respective specific XHRCLMSMN Micro Spline axle end). New matte finish 2023! Learn More

Conversion Kit consists of a front QR12 axle and the relative lateral end. The bearing preload ring (BPS) is not included and needs to be gotten from the axis owned or purchased separately. Converts the X-Hub SL Disc or SP Disc front hub from quick release or QR15 to QR12. This kit is not compatible with the pre-2012 X-Hub MTB. Made in Italy. Learn More